AquaCrest in-Line Refrigerator Filter High Capacity Drinking Water Filtration System with Direct Connect Fittings
The AQUACREST In-Line Refrigerator Filter employs a polyester membrane with a fine pore diameter and a coconut shell activated carbon block with a filtration accuracy of 0.8 μm. The filter effectively removes lead, fluoride, 98% of chlorine, taste and odor, rust, suspended solids, and colloids. It improves the taste of water from your refrigerator dispenser. BPA-free and lead-free material ensures product safety.
The filter has a service life of 5 years or 5,000 gallons. By spending an average of 1 per day, you can enjoy great-tasting water for a long time. Less expense, better filtration.
The external refrigerator filter protects the inlet water of refrigerators. The two-stage filtration provides you with better-quality water. The filter comes with both 1/4” compression and push-to-connect fittings for plastic or copper water lines. You can install the filter with a single twist, without cutting the tubing.
The filter comes with 1/4” compression and push-to-connect fittings, a 1/4” compression hex nut, a sleeve, an insert, and 1/4” PE tubing.
Compatible with most refrigerator filter brands such as Samsung, GE, LG, Whirlpool, Frigidaire, and so on. Ideal for dispensers, ice makers, RVs, boats, etc.
To reduce the risk of property damage due to water leakage, this filter MUST be installed in accordance with the manufacturer's specifications and instructions.
1. This filter unit must be replaced every 5,000 gallons or 5 years.
2. Do not use this product at temperatures under 32°F/0°C. Otherwise, the product will freeze.
Failure to follow instructions and operating specifications will void your quality assurance. Further, the manufacturer assumes no responsibility or liability for damages arising out of misuse of the product.
AQUACREST AQ-INL-S 5 Year In-Line Refrigerator Filter
Compatible with most refrigerator filter brands such as Samsung, LG, Whirlpool, Kenmore, Frigidaire, GE, etc.
Ideal for dispensers, ice makers, RVs, boats, etc.
Superior material, excellent filtration, long service life
The filter effectively reduce chlorine, rust, colloids, fluoride, lead, and other heavy metals.
The filter employs coconut shell activated carbon block with a filtration accuracy of 0.8 μm.
BPA-free and lead-free material ensures product safety.
The filter effectively filters out 98% of chlorine, 100% of taste and odor, rust, suspended solids, colloids, fluoride, lead, and other heavy metals. It improves the taste of water from your refrigerator dispenser.
You don’t need to drill any holes or cut the tubing. You can install the filter with a single twist to get ice water and ice cubes with upgraded taste.
The filter has a service life of 5 years or 5,000 gallons. On average, by spending only 0.01 dollar per day, you can enjoy great-tasting water.
Turn off the refrigerator water supply valve and turn on the dispenser to ensure that there is no residual water. Remove the water supply pipe from the joint and connect the pipe to the adapter fitting. Wrap some Teflon tape on the external thread.
Connect the adapter fitting to the filter inlet. Install the hex nut, sleeve, and insert on the 1/4” PE tubing. Connect the tubing to the joint. Wrap some Teflon tape on the external thread and tighten it with a wrench.
Put a bucket or basin at the filter outlet, open the water supply valve, and flush the filter for 5 minutes. Connect the tubing to the filter outlet.
Select suitable fittings to fix the filter.
Option 1-Bracket: Install the bracket on the cabinet wall. Then push the filter into the bracket.
Option 2-Cable tie mounts: Paste 4 cable tie mounts on proper positions, and thread the cable ties into the cable tie mounts to fix the filter.
I was surprised that the fittings just poke in the end of the filter. It is a good method but would have been nice to be explained or had a video to show the process. The filter is working great in the motorhome.