Share:

    WD-N1-MRO Replacement for Waterdrop WD-N1-W Countertop Ro Water Filtration System

    SKU
    WD-N1-MRO
    In Stock
    Waterdrop
    $39.00
    Quantity:
    Sold By
    Footwear Store
    0 / 5
    WD-N1-MRO-img-1
    WD-N1-MRO-img-2
    WD-N1-MRO-img-3
    WD-N1-MRO-img-4
    Remove the water tank
    • Remove the water tank cover. Hold the machine with one hand, and remove the water tank with the other hand.
    WD-N1-MRO-img-5
    Remove the MRO filter
    • Open the system top cover, rotate the MRO filter 90° to “. ” counterclockwise, and take out the old filter.
    WD-N1-MRO-img-6
    Insert the new filter cartridge
    • Remove the wrappings and protective cap from the new filter
    • Insert the new filter into its corresponding hole. Rotate it 90° clockwise to the dot identification.
    • Close the system top cover, put the water tank back after filling it with water, and then close the water tank cover.
    WD-N1-MRO-img-7
    Reset and flush
    • Press and hold the “MRO” filter life reset button for 5 seconds until the system beeps; the “MRO” life indicator light will turn blue and go out.
    • After the filter life is reset, the system will flush automatically for 15 minutes. Then the “Flush” indicator light will flash constantly. After the “Pump” indicator light goes out, put a container (>51 oz) below the spout. Press the “Start/Off” button to get water for deep flushing until the “Flush” indicator light goes out.
    WD-N1-MRO-img-8
    More Information
    Product Information
    Product Dimensions 2.95 x 2.95 x 12.13 inches
    Item Weight 1.3 pounds
    Manufacturer WATERDROP
    Item model number WD-N1-MRO
    *Some reviews are from amazon.com for the same product.
    Write Your Review
    Write Your Own Review
    Write Your Own Review
    WD-N1-MRO Replacement for Waterdrop WD-N1-W Countertop Ro Water Filtration System