Waterdrop Reusable Whole House Spin Down Sediment Water Filter 50 Micron,1" MNPT + 3/4" FNPT + 3/4"MNPT, Dust, Sand,Traps Rust, BPA Free, Heavy Duty 316L Molybdenum Alloy Build

Out of Stock
Only %1 left
As low as $74.99
4.5 Rating 1238 Reviews
Sold By
Footwear Store
0 / 5
Want to make sure that your water supply is free from sediment, sand, or floating particles?
According to the CDC, more than 19 million Americans get affected by drinking contaminated water. Installing water filters on your taps is a good step to take in order to have fresh and clean water for your home. But if these filters get saturated with sediment and sand, that may reduce their filtering efficiency and shorten their lifespan.
The Spin Down Sediment Filter by Waterdrop helps keep your tap water free from sediment and small particles.
Push fitting included
Waterdrop spin down sediment backwashing water filter includes two 3/4-inch push-to-connect fittings that are easy to install copper, PEX and CPVC pipes with no need of extra tools.
It's easy to disassemble fittings. You can rotate it freely in tight spaces. When pipe is inserted, it will bite down and grip the pipe for its special design, achieving a perfect sealing effect without leakage.
Most of pre-filters aren't equipped with push-to-connect fittings. Waterdrop helps you save money and time on buying extra components.
Clean & clear water
Do you always find specks of rust or small floating particles in your tap water? This can be a sign that your filters are having a tough time dealing with too much sediment in your water supply.
Our whole-house sediment filter is designed to be your water supply's first line of defense against unwanted particles, sand, rust, or floating objects. Now you can enjoy clear, clean, and sediment-free water for your cleaning and washing tasks.
Maintain strong water pressure levels
Aside from making your tap water look murky, sediment build up in your pipes and water fixtures can reduce your water supply’s flow rate.
This water filter ensures a steady stream of tap water in your household, allowing you to enjoy up to 20 GPM (gallons per minute) of water flow. Install it without worrying about throttling pressure level of your home’s water supply.
No stress maintenance
You don’t have to dismantle all your tubes and pipe fixtures when you need to clean our sediment filter. Once it gets saturated with sediment, all you need to do is apply the innovative backwash function. It is designed to quickly flush out dirt or suspended solids that have been trapped in the filter. Regular flushing will also help extend the lifespan of the filter.
Here are more reasons to install the Waterdrop sediment filter in your home:
Care for your water-using appliances Flakes of rust can get into your water supply from corroded pipes. Rainwater may also cause sand and soil to enter your water lines. These particles could clog up valves and fixtures on your water-using appliances, such as dishwashers, washing machines, toilets, and water heaters. Our sediment filter helps reduce the level of sand grains, soil, rust, and other floating particles that can wreak havoc on your water fixtures and appliances.
Heavy duty construction Not sure if this spin-down sediment filter will hold up to daily use? You can be assured that it will because it is made of food-grade 316L molybdenum alloy, which delivers stable filtration for tap water. The sediment filter is housed in a non-BPA, German-made PA12 shell, which has been subjected to rigorous voltage, pressure, explosion, and prolonged water hammer impact tests.
Work great with multi-stage filters Extend the lifespan and boost the efficiency of your multi-stage filters. Our sediment filter traps and reduces suspended solids from your water supply, making it an ideal pre-filter to use with your reverse osmosis and ultraviolet water purifiers. This whole house sediment filter takes just a few minutes to install and is designed to fit 4 types of water tubes. *NOT FOR 3/4“ garden hose
More Information
Product Information
Brand Name Waterdrop
Fabric Type This filter system works with Wholehouse Water Filtration Systems, including GE GXWH40L, Culligan R50-BBSA, DuPont WFHDC3001, Pentek R50-BB, etc, and with Undersink Water Filtration Systems, RO System
Material 316L molybdenum alloy
Maximum Flow Rate 20.00 gallons_per_minute
Measurement Accuracy 50 Micron
Questions and Anwsers

How does the back-washing function work?

The system is equipped with a flush valve, when you turn on the valve, the internal waterways will flush the steel grid mesh backward.

Where can I buy replacements for the filter?

The stainless steel filter used in our system does not need to be replaced. However, we recommend that you open the flush valve for flushing once every 2 weeks for about 10 minutes each time to extend the system time and improve system filtration performance. If the water quality in your area is poor, it is recommended to rinse once a week, and each rinse time is not less than 10 minutes.

What is the temperature rating on the is filter? Can I use it to filter hot water?

The operating temperature of the whole house water filter is 41-100 degrees Fahrenheit. Please note that it cannot be connected after a water heater but can be used before the heating equipment.

Can it be installed using PVC fittings?

In order to extend the service life of the system accessories, we prepare brass fittings for customers. You don't need to prepare PVC fittings by yourself.