Utilizing the modern Activated Carbon Fiber (ACF) material, ACF Faucet Filtration System is characterized by superior filtration performance and prolonged filter life.
Japanese filtration media
0.5-micron pore size
10x more adsorptive ability
No black flecks
WD-FC-04 ACF Faucet Filtration System
Enjoy clean, crisp tasting water from your faucet with our ultra-adsorptive Japanese ACF material and advanced multi-stage filtration technology.
-320-gallon extended filter life
-Ultra-high adsorptive ACF material
-0.5 gpm high flow rate
-Quick switch from tap water to clean water
Fit the most typical faucet aerator sizes:
-Male threaded - 15/16" or 13/16"
-Female threaded - 55/64” or 3/4”
-Do not fit pull-out, hand-held or spray style faucets.
-Please verify your faucet type before purchase.
3-pack replacement filters are available for purchase! (Search "B01GABXWFC" OR "WD-FF-01A")
Superior FiltrationThe multi-stage filtration technology that integrates Japanese ultra-adsorptive filtration material ACF enhances filtration performance and creates great tasting water.
Prolonged Filter LifeYou can get up to 3 months or 320 gallons of good-tasting water between filter replacements. The prolonged filter life will give you huge savings.
Hi-Flow Design0.5 gpm flow rate ensures an instant access to fully filtered clean water without waiting. 10 cups of water (7 oz for each) will be filled in 1 minute.
Sustainable PracticeThe filter can replace 2,000 disposable water bottles (16.9 oz for each). Effectively reduce the use of plastic bottles.
Step 1: Remove aerator from faucet.
Identify if the faucet has internal or external threads. Choose a proper adapter with right washer. For internal threaded faucets, choose from A adapters; for external threaded ones, from B adapters.
Step 2: Slide the mounting nut over your faucet.
Unscrew the mounting nut from mounting base by turning counter-clockwise. Slide the mounting nut over your faucet.
Note : Tighten Teflon tape around the faucet if needed to prevent the leakage.
Step 3: Tighten the chosen adapter on the faucet.
Put the silicone washer into your chosen adapter. Then tighten adapter onto your faucet.
Note: If the faucet threads are too short, you can put another washer into the adapter.
Step 4: Install the filter base in the mounting base.
Screw the mounting base to mounting nut firmly by turning clockwise. Then insert the filter base into mounting base and rotate the filter base 90 degree upward gently.
